PartsTable
Technical Data Sheet
AS-568A-020-70BN ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.004 INCHES NOMINAL IN, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: MRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-021-1906, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS-568A-020-70BN
NSN: 5331-01-021-1906
FSC: 5331 — O-RING
CAGE: 62351 — APPLE RUBBER PRODUCTS, INC. DBA APPLE RUBBER PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.004 INCHES NOMINAL IN
center_hole_diameter0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationMRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5
NSN5331-01-021-1906
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS-568A-020-70BN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
CENTER HOLE DIAMETER: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
END ITEM IDENTIFICATIONMRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
AN500-8-4Interchangeable
interchangeable cross-reference
interchangeable
20506-92Interchangeable
interchangeable cross-reference
interchangeable
131954Interchangeable
interchangeable cross-reference
interchangeable
0-20Interchangeable
interchangeable cross-reference
interchangeable
4318Interchangeable
IBM 17.54GB 10K RPM Ultra SCSI Disk Unit
interchangeable
4320Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS-568A-020-70BN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS-568A-020-70BN?
AS-568A-020-70BN is a O-RING.
What parts can replace AS-568A-020-70BN?
There are 31 known substitutes for AS-568A-020-70BN: AN500-8-4, 20506-92, 131954 and 28 more. Substitute compatibility should be verified for your specific system.
Is AS-568A-020-70BN still available?
AS-568A-020-70BN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS-568A-020-70BN