PartsTable
Technical Data Sheet
PartsTable / MRO / 0-20
0-20 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, tip_type: FLAT TIP, tip_width: 0.250 INCHES NOMINAL IN, body_style: SINGLE POLE TYPE, body_width: 1.000 INCHES NOMINAL IN, head_style: FILLISTER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-1954, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 0-20
NSN: 5305-00-013-1954
FSC: 5305
CAGE: 27296 — HARLEY DAVIDSON MOTOR CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
tip_typeFLAT TIP
tip_width0.250 INCHES NOMINAL IN
body_styleSINGLE POLE TYPE
body_width1.000 INCHES NOMINAL IN
head_styleFILLISTER
body_height2.312 INCHES NOMINAL IN
body_length3.344 INCHES NOMINAL IN
boss_height0.250 INCHES NOMINAL IN
design_typeNONREUSABLE
head_height0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
stock_width0.086 INCHES NOMINAL IN
NSN5305-00-013-1954
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD STYLE: FILLISTER
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH0.250 INCHES NOMINAL IN
INTERNAL DRIVE STYLESLOT
HEAD STYLEFILLISTER
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD HEIGHT0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
THREAD LENGTH0.250 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
0-20Interchangeable
interchangeable cross-reference
interchangeable
4318Interchangeable
IBM 17.54GB 10K RPM Ultra SCSI Disk Unit
interchangeable
4320Interchangeable
interchangeable cross-reference
interchangeable
ZHVY0083Interchangeable
interchangeable cross-reference
interchangeable
22070Interchangeable
interchangeable cross-reference
interchangeable
16047Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-20?
0-20 is a FILTER ELEMENT,FLUID. It is classified as a MRO (MRO_GENERAL).
What parts can replace 0-20?
There are 25 known substitutes for 0-20: 0-20, 4318, 4320 and 22 more. Substitute compatibility should be verified for your specific system.
Is 0-20 still available?
0-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026