PartsTable
Technical Data Sheet
PartsTable / O-RING / ARP568-924MILP5 516
ARP568-924MILP5 516 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 88.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.956 INCHES NOMINAL IN, center_hole_diameter: 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-019-3775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ARP568-924MILP5 516
NSN: 5331-01-019-3775
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating88.0 SHORE DUROMETER A NOMINAL
outside_diameter1.956 INCHES NOMINAL IN
center_hole_diameter1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-01-019-3775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ARP568-924MILP5 516 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.956 INCHES NOMINAL IN
•
HARDNESS RATING: 88.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CENTER HOLE DIAMETER: 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.956 INCHES NOMINAL IN
HARDNESS RATING88.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
AS3208-24Interchangeable
interchangeable cross-reference
interchangeable
3-24 V747-75Interchangeable
interchangeable cross-reference
interchangeable
2306990 REV J IT NO 168Interchangeable
interchangeable cross-reference
interchangeable
D-42042 PIECE 6Interchangeable
interchangeable cross-reference
interchangeable
AS568-924Interchangeable
interchangeable cross-reference
interchangeable
AS568-924MIL-G- 23652 TYPE 2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ARP568-924MILP5 516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ARP568-924MILP5 516?
ARP568-924MILP5 516 is a O-RING.
What parts can replace ARP568-924MILP5 516?
There are 21 known substitutes for ARP568-924MILP5 516: AS3208-24, 3-24 V747-75, 2306990 REV J IT NO 168 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ARP568-924MILP5 516?
ARP568-924MILP5 516 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-019-3775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ARP568-924MILP5 516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026