PartsTable
Technical Data Sheet
Download PDF

10087975 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10087975: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include special_features: NAME OF EQUIPMENT DPM-501S API ASSEMBLY, part_name_assigned_by_controlling_agency: INDICATOR,POSITION. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-079-1967, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10087975
NSN: 5310-00-079-1967
NIINs: 000791967, 016817713
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
special_featuresNAME OF EQUIPMENT DPM-501S API ASSEMBLY
part_name_assigned_by_controlling_agencyINDICATOR,POSITION
NSN5310-00-079-1967
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10087975 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 7
AN924J4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0150268Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN924-4CReference document
Same NSN cross-reference
Reference document — Secondary reference
8805912Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE AS5178J04Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AN924-4JSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 10087975?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10087975?
10087975 is a NUT,PLAIN,HEXAGON.
What parts can replace 10087975?
There are 7 known substitutes for 10087975: AN924J4, 5310PL0150268, AN924-4C and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10087975?
10087975 is cataloged in the U.S. Government catalog under NSN 5310-00-079-1967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10087975

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.