PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN742F12
AN742F12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 301 OR STEEL COMP 302 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0205, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN742F12
NSN: 5340-00-598-0205
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 301 OR STEEL COMP 302 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
nondefinitive_spec/std_data1 TYPE AND C CLASS
material_document_and_classificationMIL-S-5095,ANNEALED MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end1.000 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.780 INCHES NOMINAL IN
NSN5340-00-598-0205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN742F12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5095,ANNEALED MIL SPEC ALL MATERIAL RESPONSES BAND
•
SURFACE TREATMENT: PASSIVATE BAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND C CLASS
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OR STEEL COMP 302 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5095,ANNEALED MIL SPEC ALL MATERIAL RESPONSES BAND
SURFACE TREATMENTPASSIVATE BAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND C CLASS
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.204 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.780 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
5340PL1524825Upgraded Successor
successor cross-reference
successor
MS21106-16Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
AS21919WG40Upgraded Successor
successor cross-reference
successor
5340PL1653549Upgraded Successor
successor cross-reference
successor
MS21919WG40Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN742F12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742F12?
AN742F12 is a CLAMP,LOOP.
What parts can replace AN742F12?
There are 18 known substitutes for AN742F12: 5340PL1524825, MS21106-16, MIL-DTL-8603 and 15 more. Substitute compatibility should be verified for your specific system.
Is AN742F12 still available?
AN742F12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN742F12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026