Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 OVERALL, overall_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-3013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN742C4
NSN:5340-00-514-3013 FSC:5340 CAGE:88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
STEEL COMP 302 OVERALL
overall_width
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE OVERALL
material_thickness
0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
application/function
AIRCRAFT ELEC BONDING APPL
loop_inside_diameter
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
specification/standard_data
88044-AN742 GOVERNMENT STANDARD
material_document_and_classification
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end
0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
NSN
5340-00-514-3013
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SPECIFICATION/STANDARD DATA: 88044-AN742 GOVERNMENT STANDARD
•
MATERIAL: STEEL COMP 302 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A-380 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APPLICATION/FUNCTION: AIRCRAFT ELEC BONDING APPL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT
PASSIVATE OVERALL
SPECIFICATION/STANDARD DATA
88044-AN742 GOVERNMENT STANDARD
MATERIAL
STEEL COMP 302 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
ASTM A-380 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL WIDTH
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742C4?
AN742C4 is a CLAMP,LOOP.
What parts can replace AN742C4?
There are 18 known substitutes for AN742C4: 5340PL1524825, MS21106-16, MIL-DTL-8603 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN742C4?
AN742C4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-3013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.