Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, material: STEEL COMP 1010 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3021, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN742-13
NSN:5340-00-200-3021 FSC:5340 CAGE:88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
material
STEEL COMP 1010 OVERALL
overall_width
0.500 INCHES NOMINAL IN
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CADMIUM OVERALL
material_thickness
0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
loop_inside_diameter
0.803 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
nondefinitive_spec/std_data
1 TYPE AND B CLASS
material_document_and_classification
ASTM A109,T4 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end
1.029 INCHES NOMINAL IN
surface_treatment_document_and_classification
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-200-3021
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1010 OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND B CLASS
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.811 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.029 INCHES NOMINAL IN
•
DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL
STEEL COMP 1010 OVERALL
NONDEFINITIVE SPEC/STD DATA
1 TYPE AND B CLASS
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.811 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM OVERALL
DISTANCE FROM LOOP CENTER TO TONGUE END
1.029 INCHES NOMINAL IN
DIAMETER
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
STYLE DESIGNATOR
SINGLE LOOP
SURFACE TREATMENT
CADMIUM OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742-13?
AN742-13 is a CLAMP,LOOP.
What parts can replace AN742-13?
There are 28 known substitutes for AN742-13: 0011006802, FLUORO-DOT, 486464 and 25 more. Substitute compatibility should be verified for your specific system.
Is AN742-13 still available?
AN742-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.