The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 321 OVERALL, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-340-5207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN735C32
NSN:5340-01-340-5207 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
STEEL COMP 302 OR STEEL COMP 321 OVERALL
overall_width
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
style_designator
CENTER MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE OVERALL
material_thickness
0.031 INCHES NOMINAL IN
loop_inside_diameter
1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN
material_document_and_classification
MIL-S-5059,COND ANNEALED MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510,COND ANNEALED ASSN STD 2ND MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end
1.501 INCHES NOMINAL IN
surface_treatment_document_and_classification
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND ANNEALED MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510,COND ANNEALED ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.501 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATOR
CENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-5059,COND ANNEALED MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510,COND ANNEALED ASSN STD 2ND MATERIAL RESPONSE OVERALL
DIAMETER
0.204 INCHES NOMINAL IN
OVERALL WIDTH
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.501 INCHES NOMINAL IN
SURFACE TREATMENT
PASSIVATE OVERALL
TONGUE HOLE TYPE
ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735C32?
AN735C32 is a CLAMP,LOOP.
What parts can replace AN735C32?
There are 2 known substitutes for AN735C32: AS7351, SAE-AS7351. Substitute compatibility should be verified for your specific system.
What is the NSN for AN735C32?
AN735C32 is cataloged in the U.S. Government catalog under NSN 5340-01-340-5207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.