PartsTable
Technical Data Sheet
Download PDF

AS7351 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS7351: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, overall_width: 0.366 INCHES MINIMUM AND 0.386 INCHES MAXIMUM IN, style_designator: CENTER MOUNT, material_diameter: 0.031 INCHES NOMINAL IN, surface_treatment: ALUMINUM OVERALL, loop_inside_diameter: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-193-0104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS7351
NSN: 5340-00-193-0104
NIINs: 001930104, 001930118, 001930124, 001944264, 002297677, 005760551, 013405207, 014411280, 014533585, 014615212, 014746955, 014746956, 015549319, 015964532, 016157311
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
overall_width0.366 INCHES MINIMUM AND 0.386 INCHES MAXIMUM IN
style_designatorCENTER MOUNT
material_diameter0.031 INCHES NOMINAL IN
surface_treatmentALUMINUM OVERALL
loop_inside_diameter0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5 FED SPEC ALL MATERIAL RESPONSES OVERALL
part_name_assigned_by_controlling_agencyCLAMP, LOOP TYPE BONDING
surface_treatment_document_and_classificationMIL-H-6088 TO T42 CONDITION MIL SPEC ALL TREATMENT RESPONSES OVERALL
center_to_center_distance_between_loop_and_mounting_hole0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
NSN5340-00-193-0104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS7351 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC ALL MATERIAL RESPONSES BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.844 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC ALL MATERIAL RESPONSES BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.844 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.656 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 OR STEEL COMP 1025 BAND
SUBSTITUTES & CROSS-REFERENCES 3
21C2207-162Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN735-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340PL0930278Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS7351?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS7351?
AS7351 is a CLAMP,LOOP.
What parts can replace AS7351?
There are 3 known substitutes for AS7351: 21C2207-162, AN735-12, 5340PL0930278. Substitute compatibility should be verified for your specific system.
What is the NSN for AS7351?
AS7351 is cataloged in the U.S. Government catalog under NSN 5340-00-193-0104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS7351

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.