PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN735-10
AN735-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL OVERALL, overall_width: 0.375 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM OR ZINC BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-193-0102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN735-10
NSN: 5340-00-193-0102
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_width0.375 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM OR ZINC BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.781 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.594 INCHES NOMINAL IN
NSN5340-00-193-0102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN735-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC ALL MATERIAL RESPONSES BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.781 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.594 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC ALL MATERIAL RESPONSES BAND
SURFACE TREATMENTCADMIUM BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.781 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.204 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.594 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AN735-10Upgraded Successor
successor cross-reference
successor
AS7351-10Upgraded Successor
successor cross-reference
successor
AN7351-10Upgraded Successor
successor cross-reference
successor
AS7351-38Upgraded Successor
successor cross-reference
successor
SAE-AS25281Upgraded Successor
successor cross-reference
successor
MS25281-F5Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN735-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735-10?
AN735-10 is a CLAMP,LOOP.
What parts can replace AN735-10?
There are 10 known substitutes for AN735-10: AN735-10, AS7351-10, AN7351-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN735-10?
AN735-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-193-0102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN735-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026