PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN735
AN735 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: H/T PER MIL-H-6088,T42, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-193-0147, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN735
NSN: 5340-00-193-0147
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 BAND
overall_width0.375 INCHES NOMINAL IN
special_featuresH/T PER MIL-H-6088,T42
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter1.188 INCHES NOMINAL IN
end_item_identificationC-17A A
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
surface_treatment_document_and_classificationMIL-C-5541,CL3 MIL SPEC SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole0.906 INCHES NOMINAL IN
NSN5340-00-193-0147
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN735 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.437 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END1.437 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.875 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.204 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.250 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.875 INCHES NOMINAL IN
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
0904-105Upgraded Successor
successor cross-reference
successor
190586Upgraded Successor
successor cross-reference
successor
AS7351-38Upgraded Successor
successor cross-reference
successor
SAE-AS25281Upgraded Successor
successor cross-reference
successor
MS25281-F5Upgraded Successor
successor cross-reference
successor
SAE-AS7351Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN735?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735?
AN735 is a BOLT,MACHINE.
What parts can replace AN735?
There are 10 known substitutes for AN735: 0904-105, 190586, AS7351-38 and 7 more. Substitute compatibility should be verified for your specific system.
Is AN735 still available?
AN735 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN735

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026