PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6246-41
AN6246-41 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, outside_diameter: 3.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.124 INCHES NOMINAL IN, cross-sectional_thickness: 0.094 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-793-5519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6246-41
NSN: 5330-00-793-5519
FSC: 5330
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialLEATHER OVERALL
outside_diameter3.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.124 INCHES NOMINAL IN
cross-sectional_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-793-5519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6246-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 3.124 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 07868-+0S0909459 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: LEATHER OVERALL
•
OUTSIDE DIAMETER: 3.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER3.124 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
TEST DATA DOCUMENT07868-+0S0909459 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIALLEATHER OVERALL
OUTSIDE DIAMETER3.500 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
AN6246PC23Interchangeable
interchangeable cross-reference
interchangeable
1283-218Interchangeable
interchangeable cross-reference
interchangeable
P793Interchangeable
interchangeable cross-reference
interchangeable
22-14Interchangeable
interchangeable cross-reference
interchangeable
2216LSInterchangeable
interchangeable cross-reference
interchangeable
298S42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6246-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6246-41?
AN6246-41 is a GASKET.
What parts can replace AN6246-41?
There are 31 known substitutes for AN6246-41: AN6246PC23, 1283-218, P793 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6246-41?
AN6246-41 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-793-5519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6246-41

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026