PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2216LS
2216LS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, center_hole_diameter: 3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN, material_document_and_classification: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-058-2874, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2216LS
NSN: 5330-00-058-2874
FSC: 5330
CAGE: 97451 — HOUGHTON INTL INC (USA)
SPECIFICATIONS
materialLEATHER OVERALL
center_hole_diameter3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
material_document_and_classificationMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-058-2874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2216LS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.213 INCHES MINIMUM AND 3.275 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALLEATHER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
AN6246PC23Interchangeable
interchangeable cross-reference
interchangeable
1283-218Interchangeable
interchangeable cross-reference
interchangeable
P793Interchangeable
interchangeable cross-reference
interchangeable
MS35803-110Interchangeable
interchangeable cross-reference
interchangeable
2216LS-110Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-5521Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2216LS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2216LS?
2216LS is a GASKET.
What parts can replace 2216LS?
There are 32 known substitutes for 2216LS: AN6246PC23, 1283-218, P793 and 29 more. Substitute compatibility should be verified for your specific system.
Is 2216LS still available?
2216LS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2216LS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026