PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515DD8-16
AN515DD8-16 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.120 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN, thread_length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, screw_material: ALUMINUM ALLOY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515DD8-16
NSN: 5305-00-151-3776
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleROUND
head_height0.120 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
thread_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
screw_materialALUMINUM ALLOY
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentANODIZE
minimum_tensile_strength62000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-3776
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515DD8-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.120 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 32
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.120 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
INTERNAL DRIVE STYLESLOT
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTANODIZE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
FFS92ANDTYPE1ANDSTYLE1Interchangeable
interchangeable cross-reference
interchangeable
AN520C6-22Interchangeable
interchangeable cross-reference
interchangeable
29360-3Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-4Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-6Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515DD8-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515DD8-16?
AN515DD8-16 is a SCREW,MACHINE.
What parts can replace AN515DD8-16?
There are 17 known substitutes for AN515DD8-16: FFS92ANDTYPE1ANDSTYLE1, AN520C6-22, 29360-3 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515DD8-16?
AN515DD8-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515DD8-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026