PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE1ANDSTYLE1
FFS92ANDTYPE1ANDSTYLE1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.086 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_length: 0.388 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-141-5164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1ANDSTYLE1
NSN: 5305-00-141-5164
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.086 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_length0.388 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-141-5164
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1ANDSTYLE1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD HEIGHT: 0.103 INCHES MAXIMUM IN
•
HEAD STYLE: ROUND
•
THREAD LENGTH: 1.325 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.375 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD HEIGHT0.103 INCHES MAXIMUM IN
HEAD STYLEROUND
THREAD LENGTH1.325 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FFS92ANDTYPE1ANDSTYLE1Interchangeable
interchangeable cross-reference
interchangeable
29360-3Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-4Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-6Interchangeable
interchangeable cross-reference
interchangeable
AN520-4-12Interchangeable
interchangeable cross-reference
interchangeable
AN520B3R4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE1ANDSTYLE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1ANDSTYLE1?
FFS92ANDTYPE1ANDSTYLE1 is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1ANDSTYLE1?
There are 18 known substitutes for FFS92ANDTYPE1ANDSTYLE1: FFS92ANDTYPE1ANDSTYLE1, 29360-3, AN520-4-4 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1ANDSTYLE1?
FFS92ANDTYPE1ANDSTYLE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-141-5164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1ANDSTYLE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026