PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-8R13
AN515-8R13 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.120 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN, thread_length: 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-836-3567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-8R13
NSN: 5305-00-836-3567
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleROUND
head_height0.120 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
thread_length0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-836-3567
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-8R13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SCREW MATERIAL: STEEL OR STEEL COMP 1010
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
THREAD QUANTITY PER INCH: 32
•
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW MATERIALSTEEL OR STEEL COMP 1010
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD QUANTITY PER INCH32
FASTENER LENGTH0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
THREAD LENGTH0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
HEAD DIAMETER0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5305PL1370308Interchangeable
interchangeable cross-reference
interchangeable
6-2001-26Interchangeable
interchangeable cross-reference
interchangeable
NAS1100-08-12Interchangeable
interchangeable cross-reference
interchangeable
MS35206-247Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-8R13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-8R13?
AN515-8R13 is a SCREW,MACHINE.
What parts can replace AN515-8R13?
There are 4 known substitutes for AN515-8R13: 5305PL1370308, 6-2001-26, NAS1100-08-12 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-8R13?
AN515-8R13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-836-3567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-8R13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026