PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1100-08-12
NAS1100-08-12 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-815-6118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1100-08-12
NSN: 5305-00-815-6118
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
nominal_thread_diameter0.164 INCHES IN
NSN5305-00-815-6118
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1100-08-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
HEAD STYLE: PAN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENTCADMIUM
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD STYLEPAN
THREAD QUANTITY PER INCH32
FASTENER LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NAS1100-08-12Interchangeable
interchangeable cross-reference
interchangeable
5305PL1370308Interchangeable
interchangeable cross-reference
interchangeable
6-2001-26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1100-08-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1100-08-12?
NAS1100-08-12 is a SCREW,MACHINE.
What parts can replace NAS1100-08-12?
There are 3 known substitutes for NAS1100-08-12: NAS1100-08-12, 5305PL1370308, 6-2001-26. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1100-08-12?
NAS1100-08-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-815-6118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1100-08-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026