PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-2R10
AN515-2R10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.589 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-156-2782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-2R10
NSN: 5305-00-156-2782
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.589 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-156-2782
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-2R10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 56
•
HEAD HEIGHT: 0.069 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.086 INCHES IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD QUANTITY PER INCH56
HEAD HEIGHT0.069 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SCREW SURFACE TREATMENTCADMIUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
S8805S2-10Interchangeable
interchangeable cross-reference
interchangeable
AN515-2R10Interchangeable
interchangeable cross-reference
interchangeable
19007ADXInterchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE3STYLE1CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-2R10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-2R10?
AN515-2R10 is a SCREW,MACHINE.
What parts can replace AN515-2R10?
There are 4 known substitutes for AN515-2R10: S8805S2-10, AN515-2R10, 19007ADX and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-2R10?
AN515-2R10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-156-2782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-2R10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026