PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92TYPE3STYLE1C
FFS92TYPE3STYLE1C ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.137 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, thread_length: 1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-8038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92TYPE3STYLE1C
NSN: 5305-00-012-8038
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.137 INCHES NOMINAL IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
thread_length1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-012-8038
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92TYPE3STYLE1C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD SERIES DESIGNATOR: UNF
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNF
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
128038Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92TYPE3STYLE1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92TYPE3STYLE1C?
FFS92TYPE3STYLE1C is a SCREW,MACHINE.
What parts can replace FFS92TYPE3STYLE1C?
There is 1 known substitute for FFS92TYPE3STYLE1C: 128038. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92TYPE3STYLE1C?
FFS92TYPE3STYLE1C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-8038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92TYPE3STYLE1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026