The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.699 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010, fastener_length: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-715-2048, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| thread_class | 2A A |
| head_diameter | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| thread_length | 0.699 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN |
| screw_material | STEEL COMP 1010 |
| fastener_length | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.190 INCHES IN |
| screw_surface_treatment | CADMIUM AND CHROMATE |
| minimum_tensile_strength | 60000 POUNDS PER SQUARE INCH LBS |
| NSN | 5305-00-715-2048 |
| HEAD DIAMETER | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| SCREW SURFACE TREATMENT | CADMIUM |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THREAD SERIES DESIGNATOR | UNF |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 17TH MATERIAL RESPONSE OR 66 FED STD 18TH MATERIAL RESPONSE OR 66 FED STD 19TH MATERIAL RESPONSE OR 66 FED STD 20TH MATERIAL RESPONSE OR 66 FED STD 21ST MATERIAL RESPONSE OR 66 FED STD 22ND MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OR STEEL OR STEEL COMP 1011 OR STEEL COMP 1013 |
| SPECIAL FEATURES | MATERIAL,ST1016,ST1017,ST1018,ST1019,ST1020,ST1022,ST1137 DOC. AND CLASS. FED STD 66,ST0015,FED STD 66,B1122,ST0016,FED STD 66,B1123 |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |