PartsTable
Technical Data Sheet
Download PDF

AN507-1024R5 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AN507-1024R5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-0108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN507-1024R5
NSN: 5305-00-151-0108
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-0108
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN507-1024R5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL OR STEEL COMP 1010
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
8532899Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS24693S69Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AN507-1024R5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN507-1024R5?
AN507-1024R5 is a SCREW,MACHINE.
What parts can replace AN507-1024R5?
There are 2 known substitutes for AN507-1024R5: 8532899, MS24693S69. Substitute compatibility should be verified for your specific system.
What is the NSN for AN507-1024R5?
AN507-1024R5 is cataloged in the U.S. Government catalog under NSN 5305-00-151-0108. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN507-1024R5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.