8532899 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

8532899: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-0108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

8532899

NSN: 5305-00-151-0108
FSC: 5305 — Screws
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	2A A
head_diameter	0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length	0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_material	STEEL OR STEEL COMP 1010
fastener_length	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.190 INCHES IN
screw_surface_treatment	CADMIUM
minimum_tensile_strength	55000 POUNDS PER SQUARE INCH LBS
NSN	5305-00-151-0108

COMPONENT DIAGRAM

KEY FEATURES

•

SCREW SURFACE TREATMENT: CADMIUM

•

FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE

•

THREAD LENGTH: 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: STEEL OR STEEL COMP 1010

TECHNICAL CHARACTERISTICS

SCREW SURFACE TREATMENT	CADMIUM
FASTENER LENGTH	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH	0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

AN507-1024R5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS24693S69Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 8532899?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8532899?

8532899 is a SCREW,MACHINE.

What parts can replace 8532899?

There are 2 known substitutes for 8532899: AN507-1024R5, MS24693S69. Substitute compatibility should be verified for your specific system.

What is the NSN for 8532899?

8532899 is cataloged in the U.S. Government catalog under NSN 5305-00-151-0108. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8532899 — SCREW,MACHINE

Request a Quote — 8532899