PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN501A416-5
AN501A416-5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN, hole_diameter: 0.062 INCHES NOMINAL IN, thread_length: 0.241 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN501A416-5
NSN: 5305-00-151-3215
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.241 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-151-3215
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN501A416-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL
•
THREAD LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW SURFACE TREATMENT: CADMIUM
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
SCREW MATERIALSTEEL
THREAD LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
SCREW SURFACE TREATMENTCADMIUM
INTERNAL DRIVE STYLESLOT
SPECIAL FEATURESONE DRILLED HOLE IN HEAD
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN501A10-28Interchangeable
interchangeable cross-reference
interchangeable
189878Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE5Interchangeable
interchangeable cross-reference
interchangeable
R40A76Interchangeable
interchangeable cross-reference
interchangeable
AN501A416-8Interchangeable
interchangeable cross-reference
interchangeable
AN501A416-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN501A416-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN501A416-5?
AN501A416-5 is a SCREW,MACHINE.
What parts can replace AN501A416-5?
There are 14 known substitutes for AN501A416-5: AN501A10-28, 189878, FFS92ANDTYPE1ANDSTYLE5 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN501A416-5?
AN501A416-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN501A416-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026