PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN501A10-28
AN501A10-28 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-150-9647, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN501A10-28
NSN: 5305-00-150-9647
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
special_featuresONE DRILLED HOLE
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-150-9647
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN501A10-28 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH32
NOMINAL THREAD DIAMETER0.190 INCHES IN
INTERNAL DRIVE STYLESLOT
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
13760Interchangeable
interchangeable cross-reference
interchangeable
919483-9Interchangeable
interchangeable cross-reference
interchangeable
100540Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE5Interchangeable
interchangeable cross-reference
interchangeable
R40A76Interchangeable
interchangeable cross-reference
interchangeable
AN501A416-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN501A10-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN501A10-28?
AN501A10-28 is a SCREW,MACHINE.
What parts can replace AN501A10-28?
There are 16 known substitutes for AN501A10-28: 13760, 919483-9, 100540 and 13 more. Substitute compatibility should be verified for your specific system.
Is AN501A10-28 still available?
AN501A10-28 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN501A10-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026