PartsTable
Technical Data Sheet
Download PDF

AN500C8-24 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AN500C8-24: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-282-3589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500C8-24
NSN: 5305-00-282-3589
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
fastener_length1.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-00-282-3589
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500C8-24 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
•
THREAD LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH1.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
THREAD LENGTH1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
8599247-269Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFS92ANDTYPE1ANDSTYLE4Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AN500C8-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500C8-24?
AN500C8-24 is a SCREW,MACHINE.
What parts can replace AN500C8-24?
There are 2 known substitutes for AN500C8-24: 8599247-269, FFS92ANDTYPE1ANDSTYLE4. Substitute compatibility should be verified for your specific system.
What is the NSN for AN500C8-24?
AN500C8-24 is cataloged in the U.S. Government catalog under NSN 5305-00-282-3589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500C8-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.