PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE1ANDSTYLE4
FFS92ANDTYPE1ANDSTYLE4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 1.500 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1ANDSTYLE4
NSN: 5305-00-151-0605
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length1.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010
fastener_length1.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-0605
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1ANDSTYLE4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD QUANTITY PER INCH: 48
•
THREAD CLASS: 2A A
•
HEAD STYLE: FILLISTER
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.438 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH48
THREAD CLASS2A A
HEAD STYLEFILLISTER
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
HEAD DIAMETER0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
AN501B4-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE1ANDSTYLE4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1ANDSTYLE4?
FFS92ANDTYPE1ANDSTYLE4 is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1ANDSTYLE4?
There is 1 known substitute for FFS92ANDTYPE1ANDSTYLE4: AN501B4-7. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1ANDSTYLE4?
FFS92ANDTYPE1ANDSTYLE4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0605. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1ANDSTYLE4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026