PartsTable
Technical Data Sheet
Download PDF

AN500C4-12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AN500C4-12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.669 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-282-3595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500C4-12
NSN: 5305-00-282-3595
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.669 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-282-3595
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500C4-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.669 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FILLISTER
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY THD CL
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD LENGTH0.669 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFILLISTER
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY THD CL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 4
5007-72Reference document
Same NSN cross-reference
Reference document — Secondary reference
231-412SSReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
FFS92ANDTYPE1ANDSTYLE4Reference document
Same NSN cross-reference
Reference document — Identification reference
0456-135Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN500C4-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500C4-12?
AN500C4-12 is a SCREW,MACHINE.
What parts can replace AN500C4-12?
There are 4 known substitutes for AN500C4-12: 5007-72, 231-412SS, FFS92ANDTYPE1ANDSTYLE4 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN500C4-12?
AN500C4-12 is cataloged in the U.S. Government catalog under NSN 5305-00-282-3595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500C4-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.