PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN4032-2
AN4032-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: STEEL COMP 4130 BAND, overall_width: 0.250 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN4032-2
NSN: 5340-00-290-4682
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter0.156 INCHES NOMINAL IN
materialSTEEL COMP 4130 BAND
overall_width0.250 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.463 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.307 INCHES NOMINAL IN
NSN5340-00-290-4682
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN4032-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
LOOP INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.307 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.156 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
LOOP INSIDE DIAMETER2.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.307 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.463 INCHES NOMINAL IN
MATERIALSTEEL COMP 4130 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AN4032Interchangeable
interchangeable cross-reference
interchangeable
AN4032-1Interchangeable
interchangeable cross-reference
interchangeable
AN4032-3Interchangeable
interchangeable cross-reference
interchangeable
A13430Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN4032-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN4032-2?
AN4032-2 is a CLAMP,LOOP.
What parts can replace AN4032-2?
There are 4 known substitutes for AN4032-2: AN4032, AN4032-1, AN4032-3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN4032-2?
AN4032-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN4032-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026