PartsTable
Technical Data Sheet
AN4032-1 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, special_features: PIPE ACCOMMODATION DIAMETER: 1.750 IN. NOM.;SUPPORTED ITEM AND QUANTITY: 1 PIPE IN, surface_treatment: CADMIUM OVERALL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4681, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN4032-1
NSN: 5340-00-290-4681
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
special_featuresPIPE ACCOMMODATION DIAMETER: 1.750 IN. NOM.;SUPPORTED ITEM AND QUANTITY: 1 PIPE IN
surface_treatmentCADMIUM OVERALL
NSN5340-00-290-4681
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN4032-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: CADMIUM OVERALL
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SPECIAL FEATURESPIPE ACCOMMODATION DIAMETER: 1.750 IN. NOM.;SUPPORTED ITEM AND QUANTITY: 1 PIPE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AN4032Interchangeable
interchangeable cross-reference
interchangeable
AN4032-2Interchangeable
interchangeable cross-reference
interchangeable
AN4032-3Interchangeable
interchangeable cross-reference
interchangeable
A13430Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN4032-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN4032-1?
AN4032-1 is a CLAMP,LOOP.
What parts can replace AN4032-1?
There are 4 known substitutes for AN4032-1: AN4032, AN4032-2, AN4032-3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN4032-1?
AN4032-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN4032-1