PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AH20855
AH20855 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.781 INCHES NOMINAL IN, loop_inside_diameter: 8.125 INCHES NOMINAL IN, end_item_identification: W/S:4000 LB ROUGH TERRAIN FORKLIFT LBS, integral_nut_type_and_quantity: 1 PLAIN EQUAL LENGTH TONGUES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-214-3117, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AH20855
NSN: 5340-00-214-3117
FSC: 5340
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.781 INCHES NOMINAL IN
loop_inside_diameter8.125 INCHES NOMINAL IN
end_item_identificationW/S:4000 LB ROUGH TERRAIN FORKLIFT LBS
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
NSN5340-00-214-3117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AH20855 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
•
LOOP INSIDE DIAMETER: 8.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
END ITEM IDENTIFICATIONW/S:4000 LB ROUGH TERRAIN FORKLIFT LBS
OVERALL WIDTH0.781 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
LOOP INSIDE DIAMETER8.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
212673Interchangeable
interchangeable cross-reference
interchangeable
75-694Interchangeable
interchangeable cross-reference
interchangeable
59860DAInterchangeable
Same NIIN cross-reference
interchangeable
D75694Interchangeable
Same NIIN cross-reference
interchangeable
59860DInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AH20855?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AH20855?
AH20855 is a CLAMP,LOOP.
What parts can replace AH20855?
There are 5 known substitutes for AH20855: 212673, 75-694, 59860DA and 2 more. Substitute compatibility should be verified for your specific system.
Is AH20855 still available?
AH20855 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AH20855

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026