PartsTable / COMPONENT / 59860DA
59860DA — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.781 INCHES NOMINAL IN, loop_inside_diameter: 8.125 INCHES NOMINAL IN, end_item_identification: W/S:4000 LB ROUGH TERRAIN FORKLIFT LBS, integral_nut_type_and_quantity: 1 PLAIN EQUAL LENGTH TONGUES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-214-3117, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
59860DA
NSN: 5340-00-214-3117 FSC: 5340 CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
material STEEL BAND overall_width 0.781 INCHES NOMINAL IN loop_inside_diameter 8.125 INCHES NOMINAL IN end_item_identification W/S:4000 LB ROUGH TERRAIN FORKLIFT LBS integral_nut_type_and_quantity 1 PLAIN EQUAL LENGTH TONGUES NSN 5340-00-214-3117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 59860DA
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
• LOOP INSIDE DIAMETER: 8.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL STEEL BAND END ITEM IDENTIFICATION W/S:4000 LB ROUGH TERRAIN FORKLIFT LBS OVERALL WIDTH 0.781 INCHES NOMINAL IN INTEGRAL NUT TYPE AND QUANTITY 1 PLAIN EQUAL LENGTH TONGUES LOOP INSIDE DIAMETER 8.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
212673 Interchangeable interchangeable cross-reference
interchangeable
75-694 Interchangeable interchangeable cross-reference
interchangeable
D75694 Interchangeable Same NIIN cross-reference
interchangeable
59860D Interchangeable Same NIIN cross-reference
interchangeable
AH20855 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 59860DA?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 59860DA?
59860DA is a CLAMP,LOOP.
What parts can replace 59860DA?
There are 5 known substitutes for 59860DA: 212673, 75-694, D75694 and 2 more. Substitute compatibility should be verified for your specific system.
Is 59860DA still available?
59860DA is currently cancelled.
Request a Quote — 59860DA