PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A6067
A6067 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL COMP 1010 OUTER LAYER, corner_shape: SQUARE ALL CORNERS, overall_length: 2.1825 INCHES MINIMUM AND 2.1925 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.5640 INCHES MINIMUM AND 0.5660 INCHES MAXIMUM IN, body_outside_diameter: 0.7520 INCHES MINIMUM AND 0.7540 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A6067
NSN: 3110-00-100-3684
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OUTER LAYER
corner_shapeSQUARE ALL CORNERS
overall_length2.1825 INCHES MINIMUM AND 2.1925 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.5640 INCHES MINIMUM AND 0.5660 INCHES MAXIMUM IN
body_outside_diameter0.7520 INCHES MINIMUM AND 0.7540 INCHES MAXIMUM IN
NSN3110-00-100-3684
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A6067 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.4391 INCHES NOMINAL IN
•
BORE DIAMETER: 0.6690 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE WIDTH0.4391 INCHES NOMINAL IN
BORE DIAMETER0.6690 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6067Interchangeable
interchangeable cross-reference
interchangeable
320174Interchangeable
interchangeable cross-reference
interchangeable
6067-1Interchangeable
interchangeable cross-reference
interchangeable
12149-1Interchangeable
interchangeable cross-reference
interchangeable
73499-20Interchangeable
interchangeable cross-reference
interchangeable
11931Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A6067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A6067?
A6067 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace A6067?
There are 14 known substitutes for A6067: 6067, 320174, 6067-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A6067?
A6067 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A6067

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026