PartsTable
Technical Data Sheet
PartsTable / MRO / 6067
6067 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, body_width: 0.750 INCHES NOMINAL IN, cone_width: 0.5800 INCHES NOMINAL IN, nut_height: 0.141 INCHES NOMINAL IN, body_height: 0.750 INCHES NOMINAL IN, body_length: 2.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 6067
NSN: 3110-00-100-3684
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.750 INCHES NOMINAL IN
cone_width0.5800 INCHES NOMINAL IN
nut_height0.141 INCHES NOMINAL IN
body_height0.750 INCHES NOMINAL IN
body_length2.188 INCHES NOMINAL IN
thread_class2B
body_materialMETAL
bore_diameter1.0625 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
inclosure_typeHERMETICALLY SEALED
overall_height1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
NSN3110-00-100-3684
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6067 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.4391 INCHES NOMINAL IN
•
BORE DIAMETER: 0.6690 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE WIDTH0.4391 INCHES NOMINAL IN
BORE DIAMETER0.6690 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6067Interchangeable
interchangeable cross-reference
interchangeable
320174Interchangeable
interchangeable cross-reference
interchangeable
6067-1Interchangeable
interchangeable cross-reference
interchangeable
12149-1Interchangeable
interchangeable cross-reference
interchangeable
73499-20Interchangeable
interchangeable cross-reference
interchangeable
11931Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6067?
6067 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6067?
There are 14 known substitutes for 6067: 6067, 320174, 6067-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6067?
6067 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6067

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026