PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A58080
A58080 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, outside_diameter: 1.832 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.828 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-4679, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A58080
NSN: 5330-00-178-4679
FSC: 5330
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
outside_diameter1.832 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.828 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-178-4679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A58080 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.832 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
SURFACE TREATMENT: PLASTIC CASE
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER1.828 INCHES NOMINAL IN
OUTSIDE DIAMETER1.832 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.438 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
3179Interchangeable
interchangeable cross-reference
interchangeable
22-02041-001Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
5308F-272Interchangeable
interchangeable cross-reference
interchangeable
415HInterchangeable
interchangeable cross-reference
interchangeable
5308FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A58080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A58080?
A58080 is a SEAL,PLAIN ENCASED.
What parts can replace A58080?
There are 24 known substitutes for A58080: 3179, 22-02041-001, 00044 and 21 more. Substitute compatibility should be verified for your specific system.
Is A58080 still available?
A58080 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A58080

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026