PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22-02041-001
22-02041-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 1.832 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-115-1522, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22-02041-001
NSN: 5330-00-115-1522
FSC: 5330
CAGE: 92053 — R AND M MATERIALS HANDLING INC HOIST DIV OF KONE MATERIALS HANDLING INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter1.832 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.828 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-115-1522
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22-02041-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.828 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
5308F-272Interchangeable
interchangeable cross-reference
interchangeable
415HInterchangeable
interchangeable cross-reference
interchangeable
5308FInterchangeable
interchangeable cross-reference
interchangeable
A58080Interchangeable
interchangeable cross-reference
interchangeable
10040Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22-02041-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22-02041-001?
22-02041-001 is a SEAL,PLAIN ENCASED.
What parts can replace 22-02041-001?
There are 26 known substitutes for 22-02041-001: 5308F-272, 415H, 5308F and 23 more. Substitute compatibility should be verified for your specific system.
Is 22-02041-001 still available?
22-02041-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22-02041-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026