PartsTable
Technical Data Sheet
Download PDF

A48ZC — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A48ZC: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.156 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-1743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A48ZC
NSN: 5310-00-012-1743
FSC: 5310 — Nuts and Washers
CAGE: 56118 — SPARTON CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.156 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.216 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch24
nondefinitive_spec/std_data2 TYPE AND 13 STYLE AND A GRADE AND C GROUP
NSN5310-00-012-1743
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A48ZC · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.216 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 13 STYLE AND A GRADE AND C GROUP
•
NUT HEIGHT: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.216 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 13 STYLE AND A GRADE AND C GROUP
NUT HEIGHT0.156 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 5
121743Reference document
Same NSN cross-reference
Reference document — Secondary reference
B18.6.3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
FF-N-836 TY2ST13GRAGPCReference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0805742Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy A48ZC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A48ZC?
A48ZC is a NUT,PLAIN,HEXAGON.
What parts can replace A48ZC?
There are 5 known substitutes for A48ZC: 121743, B18.6.3, FF-N-836 TY2ST13GRAGPC and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A48ZC?
A48ZC is cataloged in the U.S. Government catalog under NSN 5310-00-012-1743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A48ZC