PartsTable
Technical Data Sheet
Download PDF

121743 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

121743: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include media_for_which_designed: HYDRAULIC FLUID SINGLE RESPONSE, measuring_method_and_length: 31.0 INCHES NOMINAL OVERALL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-1743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
121743
NSN: 5310-00-012-1743
NIINs: 000121743, 016145939
FSC: 5310 — Nuts and Washers
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
measuring_method_and_length31.0 INCHES NOMINAL OVERALL IN
NSN5310-00-012-1743
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 121743 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.216 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 13 STYLE AND A GRADE AND C GROUP
•
NUT HEIGHT: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.216 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 13 STYLE AND A GRADE AND C GROUP
NUT HEIGHT0.156 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 5
A48ZCReference document
Same NSN cross-reference
Reference document — Secondary reference
B18.6.3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
FF-N-836 TY2ST13GRAGPCReference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0805742Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 121743?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 121743?
121743 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 121743?
There are 5 known substitutes for 121743: A48ZC, B18.6.3, FF-N-836 TY2ST13GRAGPC and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 121743?
121743 is cataloged in the U.S. Government catalog under NSN 5310-00-012-1743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 121743