PartsTable
Technical Data Sheet
PartsTable / MRO / A295-6
A295-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include width: 1.120 INCHES NOMINAL IN, length: 1.375 INCHES NOMINAL IN, diameter: 0.140 INCHES NOMINAL IN, material: CARBON, top_style: FLAT, body_style: WEDGE-SHAPE COMMUTATOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6679, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A295-6
NSN: 5340-00-024-6679
FSC: 5340
CAGE: 35918 — HORIZON AEROSPACE LLC DBA MAGNETICS DIVISION (USA)
SPECIFICATIONS
width1.120 INCHES NOMINAL IN
length1.375 INCHES NOMINAL IN
diameter0.140 INCHES NOMINAL IN
materialCARBON
top_styleFLAT
body_styleWEDGE-SHAPE COMMUTATOR
body_width1.120 INCHES NOMINAL IN
body_height2.500 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
body_materialMETAL
overall_width0.250 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
NSN5340-00-024-6679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A295-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.140 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
LOOP INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.213 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.140 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.213 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
NX 1Upgraded Successor
successor cross-reference
successor
3705-3020-001Upgraded Successor
successor cross-reference
successor
SSML7-4-2Upgraded Successor
successor cross-reference
successor
5340-99-932Upgraded Successor
successor cross-reference
successor
011152Upgraded Successor
successor cross-reference
successor
30-177Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A295-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A295-6?
A295-6 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace A295-6?
There are 22 known substitutes for A295-6: NX 1, 3705-3020-001, SSML7-4-2 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A295-6?
A295-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A295-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026