PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 135658-1
135658-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.140 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.025 INCHES NOMINAL IN, loop_inside_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6679, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
135658-1
NSN: 5340-00-024-6679
FSC: 5340
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
diameter0.140 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.213 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
NSN5340-00-024-6679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 135658-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.140 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
LOOP INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.213 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.140 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.213 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
NX 1Upgraded Successor
successor cross-reference
successor
3705-3020-001Upgraded Successor
successor cross-reference
successor
SSML7-4-2Upgraded Successor
successor cross-reference
successor
5340-99-932Upgraded Successor
successor cross-reference
successor
011152Upgraded Successor
successor cross-reference
successor
30-177Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 135658-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135658-1?
135658-1 is a CLAMP,LOOP.
What parts can replace 135658-1?
There are 21 known substitutes for 135658-1: NX 1, 3705-3020-001, SSML7-4-2 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 135658-1?
135658-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135658-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026