PartsTable
Technical Data Sheet
Download PDF

A265103-8S13 — FLANGE,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

A265103-8S13: FLANGE,PIPE.

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, throat_depth: 3.625 INCHES NOMINAL IN, inside_diameter: 1.750 INCHES NOMINAL IN, outside_diameter: 0.843 INCHES NOMINAL IN, special_features: SLIDING PIN SCREW (FULL LENGTH); 3/4 IN. SCREW DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 4730-00-967-4197, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A265103-8S13
NSN: 4730-00-967-4197
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
throat_depth3.625 INCHES NOMINAL IN
inside_diameter1.750 INCHES NOMINAL IN
outside_diameter0.843 INCHES NOMINAL IN
special_featuresSLIDING PIN SCREW (FULL LENGTH); 3/4 IN. SCREW DIA IN
style_designatorADJUSTABLE BAND
test_load_rating5400.0 POUNDS LBS
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
jaw_nominal_opening6.000 INCHES IN
inside_surface_conditionSMOOTH
NSN4730-00-967-4197
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: A265103-8S13 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 2
FG1183HHH0130Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
J406Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A265103-8S13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A265103-8S13?
A265103-8S13 is a FLANGE,PIPE.
What parts can replace A265103-8S13?
There are 2 known substitutes for A265103-8S13: FG1183HHH0130, J406. Substitute compatibility should be verified for your specific system.
What is the NSN for A265103-8S13?
A265103-8S13 is cataloged in the U.S. Government catalog under NSN 4730-00-967-4197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A265103-8S13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.