PartsTable
Technical Data Sheet
Download PDF

J406 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

J406: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL CORROSION RESISTING OVERALL, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, throat_depth: 3.625 INCHES NOMINAL IN, inside_diameter: 1.750 INCHES NOMINAL IN, outside_diameter: 0.843 INCHES NOMINAL IN, special_features: SLIDING PIN SCREW (FULL LENGTH); 3/4 IN. SCREW DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 4720-00-930-4514, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J406
NSN: 4720-00-930-4514
NIINs: 009304514, 009451998, 009674197, 013999445
FSC: 4720 — Hose and Flexible Tubing
CAGE: 13174 — PARKER HANNIFIN CORP HOSE PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
throat_depth3.625 INCHES NOMINAL IN
inside_diameter1.750 INCHES NOMINAL IN
outside_diameter0.843 INCHES NOMINAL IN
special_featuresSLIDING PIN SCREW (FULL LENGTH); 3/4 IN. SCREW DIA IN
style_designatorADJUSTABLE BAND
test_load_rating5400.0 POUNDS LBS
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
jaw_nominal_opening6.000 INCHES IN
inside_surface_conditionSMOOTH
NSN4720-00-930-4514
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: J406 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.843 INCHES NOMINAL IN
•
OPERATING PRESSURE: 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-13531/MO GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND A CLASS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.843 INCHES NOMINAL IN
OPERATING PRESSURE4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-13531/MO GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA2 TYPE AND A CLASS
INSIDE DIAMETER0.375 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 8
541161Reference document
Same NSN cross-reference
Reference document — Secondary reference
J517TABLE2H0SE100R2TYPEAReference document
Same NSN cross-reference
Reference document — Secondary reference
R2-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
2766-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
60RAReference document
Same NSN cross-reference
Reference document — Secondary reference
M13531-B6A-BULKSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J406?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J406?
J406 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace J406?
There are 8 known substitutes for J406: 541161, J517TABLE2H0SE100R2TYPEA, R2-6 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J406?
J406 is cataloged in the U.S. Government catalog under NSN 4720-00-930-4514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J406

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.