PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A15667-1
A15667-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.047 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-9393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A15667-1
NSN: 5340-00-993-9393
FSC: 5340
CAGE: 07639 — GE AVIATION SYSTEMS LLC DBA GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.548 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-993-9393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A15667-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.360 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.375 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.360 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.548 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
8955Upgraded Successor
successor cross-reference
successor
NAS1397P2EBUpgraded Successor
successor cross-reference
successor
094430-0000Upgraded Successor
successor cross-reference
successor
NPC2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A15667-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A15667-1?
A15667-1 is a CLAMP,LOOP.
What parts can replace A15667-1?
There are 4 known substitutes for A15667-1: 8955, NAS1397P2EB, 094430-0000 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A15667-1?
A15667-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-9393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A15667-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026