PartsTable / COMPONENT / A1405F6
A1405F6
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, housing_bore_diameter: 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-6200, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
A1405F6
NSN: 5330-00-599-6200 FSC: 5330 CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT A case_style SQUARE seal_width 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN housing_bore_diameter 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN sealing_element_style VERTICAL-ANGULAR accommodated_shaft_diameter 1.000 INCHES NOMINAL IN NSN 5330-00-599-6200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: A1405F6
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
• SEALING ELEMENT STYLE: VERTICAL-ANGULAR
• HOUSING BORE DIAMETER: 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN CASE STYLE SQUARE ACCOMMODATED SHAFT DIAMETER 1.000 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT A SEALING ELEMENT STYLE VERTICAL-ANGULAR MATERIAL STEEL CASE HOUSING BORE DIAMETER 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
131575 Interchangeable interchangeable cross-reference
interchangeable
A20-1A Interchangeable interchangeable cross-reference
interchangeable
2105-3 Interchangeable interchangeable cross-reference
interchangeable
A20-1AB Interchangeable interchangeable cross-reference
interchangeable
8JA374 Interchangeable interchangeable cross-reference
interchangeable
592A Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy A1405F6?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1405F6?
A1405F6 is a SEAL,PLAIN ENCASED.
What parts can replace A1405F6?
There are 20 known substitutes for A1405F6: 131575, A20-1A, 2105-3 and 17 more. Substitute compatibility should be verified for your specific system.
Is A1405F6 still available?
A1405F6 is currently cancelled.
Request a Quote — A1405F6