PartsTable
Technical Data Sheet
Download PDF

3021053-8 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3021053-8: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, housing_bore_diameter: 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-599-6200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3021053-8
NSN: 5330-00-599-6200
FSC: 5330 — Packing and Gasket Materials
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
housing_bore_diameter1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
NSN5330-00-599-6200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3021053-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER1.501 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 7
6703159Reference document
Same NSN cross-reference
Reference document — Secondary reference
131575Reference document
Same NSN cross-reference
Reference document — Secondary reference
471224Reference document
Same NSN cross-reference
Reference document — Secondary reference
21053Reference document
Same NSN cross-reference
Reference document — Secondary reference
470120Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1405F6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 3021053-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3021053-8?
3021053-8 is a SEAL,PLAIN ENCASED.
What parts can replace 3021053-8?
There are 7 known substitutes for 3021053-8: 6703159, 131575, 471224 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3021053-8?
3021053-8 is cataloged in the U.S. Government catalog under NSN 5330-00-599-6200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3021053-8