PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1205K713
A1205K713 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT A, case_style: SHOULDERED, seal_width: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN, outside_diameter: 5.506 INCHES NOMINAL IN, housing_bore_diameter: 5.504 INCHES MINIMUM AND 5.508 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-653-5753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1205K713
NSN: 5330-00-653-5753
FSC: 5330
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT A
case_styleSHOULDERED
seal_width1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
outside_diameter5.506 INCHES NOMINAL IN
housing_bore_diameter5.504 INCHES MINIMUM AND 5.508 INCHES MAXIMUM IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
NSN5330-00-653-5753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1205K713 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SHOULDERED
•
HOUSING BORE DIAMETER: 5.504 INCHES MINIMUM AND 5.508 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
SEAL WIDTH: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 5.506 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESHOULDERED
HOUSING BORE DIAMETER5.504 INCHES MINIMUM AND 5.508 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALLEATHER SEALING ELEMENT A
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
SEAL WIDTH1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
OUTSIDE DIAMETER5.506 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
001-30144Interchangeable
interchangeable cross-reference
interchangeable
5T5147Interchangeable
interchangeable cross-reference
interchangeable
MA1605Interchangeable
interchangeable cross-reference
interchangeable
30144Interchangeable
interchangeable cross-reference
interchangeable
SA30144Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83461Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1205K713?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1205K713?
A1205K713 is a SEAL,PLAIN ENCASED.
What parts can replace A1205K713?
There are 15 known substitutes for A1205K713: 001-30144, 5T5147, MA1605 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1205K713?
A1205K713 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-653-5753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1205K713

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026