- 3-pin Australian Mains Plug to IEC C13 Socket<br>- Electrical Safety Authority Approved<br>- Insulated pins compliant with AS/NZS 3112:2000<br>- 100% electrical and mechanical inspection<br>- Fully moulded<br>- Colour: Black<br>- 10 year warranty This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 316 |
| case_style | SHOULDERED |
| seal_width | 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN |
| temp_rating | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF |
| overall_width | 0.8750 INCHES NOMINAL IN |
| hardness_rating | 75.0 SHORE DUROMETER A NOMINAL |
| outside_diameter | 4.895 INCHES NOMINAL IN |
| special_features | COMPONENT OF REAR TAKE DOWN MECHANISM |
| style_designator | NORMAL ANGLE |
| mounting_facility | NOT INCLUDED |
| center_hole_diameter | 4.445 INCHES MINIMUM AND 4.505 INCHES MAXIMUM IN |
| elongation_percentage | 125 MAXIMUM |
| NSN | 3110-00-100-0311 |
| BACKFACE CORNER RADIUS | 0.0938 INCHES NOMINAL IN |
| OVERALL WIDTH | 0.8750 INCHES NOMINAL IN |
| OUTSIDE DIAMETER | 3.7500 INCHES NOMINAL IN |
| MATERIAL | STEEL OVERALL |
| STYLE DESIGNATOR | NORMAL ANGLE |
| STANDARD TOLERANCE DESIGNATION | AFBMA CLASS 2 |
| SPECIAL FEATURES | AXIAL DISTANCE BETWEEN CENTER OF CUP CONTACT LINE AND BEARING STABILITY POINT ON SHAFT AXIS 0.3600 IN. IN |