PartsTable
Technical Data Sheet
Download PDF

A05201 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A05201: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, length: 0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, overall_height: 0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-010-2693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A05201
NSN: 5340-01-010-2693
FSC: 5340 — Hardware, Commercial
CAGE: K0967 — MBDA UK LTD (GBR)
SPECIFICATIONS
width1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
length0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
overall_height0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.366 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-010-2693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A05201 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.366 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
LENGTH0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
MATERIAL THICKNESS0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.366 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
M24066/4-005Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-C-24066/4Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM24066/4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A05201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A05201?
A05201 is a CLIP,SPRING TENSION.
What parts can replace A05201?
There are 3 known substitutes for A05201: M24066/4-005, MIL-C-24066/4, NASM24066/4. Substitute compatibility should be verified for your specific system.
What is the NSN for A05201?
A05201 is cataloged in the U.S. Government catalog under NSN 5340-01-010-2693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A05201

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.