PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A0112PART011222EL
A0112PART011222EL ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 1.760 INCHES NOMINAL IN, center_hole_diameter: 1.522 INCHES NOMINAL IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9749, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A0112PART011222EL
NSN: 5330-01-020-9749
FSC: 5330
CAGE: 99565 — ADMIRAL VALVE LLC DBA CPV MANUFACTURING (USA)
SPECIFICATIONS
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter1.760 INCHES NOMINAL IN
center_hole_diameter1.522 INCHES NOMINAL IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-01-020-9749
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A0112PART011222EL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
•
CENTER HOLE DIAMETER: 1.522 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.760 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
JOINT TYPESCARF-PERIPHERAL RETAINER
CENTER HOLE DIAMETER1.522 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.760 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SAE-AS8791Interchangeable
interchangeable cross-reference
interchangeable
011222ELInterchangeable
interchangeable cross-reference
interchangeable
982199Interchangeable
interchangeable cross-reference
interchangeable
4990408Interchangeable
interchangeable cross-reference
interchangeable
C8384ITEM12Interchangeable
interchangeable cross-reference
interchangeable
235716-0001ITEM11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A0112PART011222EL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A0112PART011222EL?
A0112PART011222EL is a RETAINER,PACKING.
What parts can replace A0112PART011222EL?
There are 8 known substitutes for A0112PART011222EL: SAE-AS8791, 011222EL, 982199 and 5 more. Substitute compatibility should be verified for your specific system.
Is A0112PART011222EL still available?
A0112PART011222EL is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A0112PART011222EL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026