PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 011222EL
011222EL ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 1.760 INCHES NOMINAL IN, center_hole_diameter: 1.522 INCHES NOMINAL IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6695, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
011222EL
NSN: 5330-00-171-6695
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter1.760 INCHES NOMINAL IN
center_hole_diameter1.522 INCHES NOMINAL IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-00-171-6695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 011222EL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.740 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-BUTT RETAINER
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.500 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.120 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.740 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
JOINT TYPESCARF-BUTT RETAINER
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
4990408Interchangeable
interchangeable cross-reference
interchangeable
C8384ITEM12Interchangeable
interchangeable cross-reference
interchangeable
235716-0001ITEM11Interchangeable
interchangeable cross-reference
interchangeable
01122LELInterchangeable
interchangeable cross-reference
interchangeable
011222ELInterchangeable
interchangeable cross-reference
interchangeable
A0112PART011222ELInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 011222EL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 011222EL?
011222EL is a RETAINER,PACKING.
What parts can replace 011222EL?
There are 17 known substitutes for 011222EL: 4990408, C8384ITEM12, 235716-0001ITEM11 and 14 more. Substitute compatibility should be verified for your specific system.
Is 011222EL still available?
011222EL is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 011222EL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026