PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A-292
A-292 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, grip_length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, head_height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.375 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, fastener_length: 0.891 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-144-3648, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-292
NSN: 5306-00-144-3648
FSC: 5306
CAGE: 11599 — TRIUMPH ENGINE CONTROL SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
head_styleHEXAGON
grip_length0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
head_height0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
thread_class3A A
thread_length0.375 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
fastener_length0.891 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
NSN5306-00-144-3648
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A-292 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.375 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM FIRST HOLE IN
•
THREAD QUANTITY PER INCH: 32
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.375 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.190 INCHES IN
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM FIRST HOLE IN
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
THREAD SERIES DESIGNATORUNF
THREAD CLASS3A A
HEAD HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
47753-1Upgraded Successor
successor cross-reference
successor
400054Upgraded Successor
successor cross-reference
successor
R337PC44Interchangeable
interchangeable cross-reference
interchangeable
R107PC44Interchangeable
interchangeable cross-reference
interchangeable
A476Interchangeable
interchangeable cross-reference
interchangeable
26558Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-292?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-292?
A-292 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace A-292?
There are 19 known substitutes for A-292: 47753-1, 400054, R337PC44 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-292?
A-292 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-144-3648. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-292

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026